
series 7513 overview
Mining dump trucks with payload capacity of 110-136 tonnes are designed for transportation of rocks in severe mining conditions of deep pits, at open-cast mining of mineral deposits on technological haul roads under various climatic operating conditions (ambient temperatures from -50 to +50 degrees Celsius).
Characteristics
Modification | Load capacity, tons | Engine | Engine power, kW | Transmission |
---|---|---|---|---|
BELAZ 7513 | 130-136 | QSK 45-C | 1193 | electromechanical |
BELAZ 75131 | 130-136 | KTA 50-C | 1194 | electromechanical |
BELAZ 75137 | 130-136 | MTU DD 12V4000 | 1193 | electromechanical |
BELAZ 75135 | 130-136 | KTA 38-C | 895 | electromechanical |
BELAZ 75139 | 130-136 | KTA 50-C | 1194 | electromechanical |
BELAZ 7513A | 130-136 | MTU DD 12V4000 | 1194 | electromechanical |
BELAZ 7513B | 130-136 | MTU DD 12V4000 | 1194 | electromechanical |
series 7513 overview
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under different climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500 (12050***) mm |
Width | 6400 (7350***) mm |
Height | 5900 (5900***) mm |
main CHARACTERISTICS
Capacity | 130-136 mt |
Engine | QSK 45-C |
Engine power | 1193 kW |
Transmission | electromechanical |
Transmission Formula |
additional CHARACTERISTICS
Torque Nm / r / min | 6836/ 1500 |
Fuel rate @ nominal power, g/kW*h | 209 |
Tires | 33.00-51; 33.00R51; 36/90-51 |
Transmission | Mechanical, with single-stage main gear, bevel gear differential and planetary wheel gears |
Motor-wheels reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles - trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
drear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5; 50,1; 55,0; 59,6; 103,8 |
heaped 2:1 | 71,2; 75,5; 80,0; 84,0; 134,8 |
turning radius, m | 13 |
Dump Weight, kg
unladen | 109500 (standard equipment set) |
gross weight | 239500-245000 |
max speed, km/h | 64 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500 (12050) mm |
Width | 6400 (7350) mm |
Height | 5900 (5900) mm |
main CHARACTERISTICS
Capacity | 130-136 mt |
Engine | KTA 50-C |
Engine power | 1194 kW |
Transmission | electromechanical |
Transmission Formula |
additional CHARACTERISTICS
Torque Nm / r / min | 6292 / 1500 |
Fuel rate @ nominal power, g/kW*h | 208 |
Tires | 33.00-51; 33.00R51; 36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 40,0; 45,5; 50,1; 55,0; 59,6; 103,8 |
heaped 2:1 | 67,0; 71,2; 75,5; 80,0; 84,0; 134,8 |
turning radius, m | 13 |
Dump Weight, kg
unladen | 107100 (standard equipment set) |
gross weight | 237100-243100 |
Max speed, km/h | 50 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500 (12050) mm |
Width | 6400 (7350) mm |
Height | 5900 (5900) mm |
main CHARACTERISTICS
Capacity | 130-136 mt |
Engine | MTU DD 12V4000 |
Engine power | 1193 kW |
Transmission | electromechanical |
Transmission Formula | AC/DC |
additional CHARACTERISTICS
Torque Nm / r / min | 7612 / 1500 |
Fuel rate @ nominal power, g/kW*h | 201 |
Tires | 33.00-51; 33.00R51; 36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5; 50,1; 55,0; 59,6; 103,8; 63,4 |
heaped 2:1 | 71,2; 75,5; 80,0; 84,0; 134,8; 86,6 |
turning radius, m | 13 |
Dump Weight, kg
unladen | 108100 (standard equipment set) |
gross weight | 238100-244100 |
Max speed, km/h | 50 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500 (12050) mm |
Width | 6400 (7350) mm |
Height | 5900 (5900) mm |
main CHARACTERISTICS
Capacity | 110-130 mt |
Engine | KTA 38-C |
Engine power | 895 kW |
Transmission | electromechanical |
Transmission Formula | AC/DC |
additional CHARACTERISTICS
Torque Nm / r / min | 4726 / 1300 |
Fuel rate @ nominal power, g/kW*h | 207 |
Tires | 33.00-51; 33.00R51; 36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5 |
heaped 2:1 | 71,2 |
Turning radius, m | 13 |
Dump Weight, kg
unladen | 100100 |
gross weight | 230100 |
Max speed, km/h | 50 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500; 12050 mm |
Width | 6400; 7350 mm |
Height | 55900; 5900 mm |
main CHARACTERISTICS
Capacity | 110-130 mt |
Engine | KTA 50-C |
Engine power | 1194 kW |
Transmission | electromechanical |
Transmission Formula | AC/DC |
additional CHARACTERISTICS
Torque Nm / r / min | 6292 / 1500 |
Fuel rate @ nominal power, g/kW*h | 207 |
Tires | 33.00-51; 33.00R51; 36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5; 50,1; 55,0; 59,6; 103,8 |
heaped 2:1 | 71,2; 75,5; 80,0; 84,0; 134,8 |
Turning radius, m | 13 |
Dump Weight, kg
unladen | 108500 (standard equipment set) |
gross weight | 238500-244500 |
Max speed, km/h | 64 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500; 12050 mm |
Width | 6400; 7350 mm |
Height | 5900; 5900 mm |
main CHARACTERISTICS
Capacity | 110-130 mt |
Engine | MTU DD 12V4000 |
Engine power | 1194 kW |
Transmission | electromechanical |
Transmission Formula |
additional CHARACTERISTICS
Torque Nm / r / min | 7612 / 1500 |
Fuel rate @ nominal power, g/kW*h | 201 |
Tires | 33.00-51; 33.00R51;36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5; 50,1; 55,0; 59,6; 63,4; 103,8 |
heaped 2:1 | 71,2; 75,5; 80,0; 84,0; 86,6; 134,8 |
Turning radius, m | 13 |
Dump Weight, kg
unladen | 110400 (standard equipment set) |
gross weight | 240400-246400 |
Max speed, km/h | 64 |
Designed for transportation of loosened rocks on technological haul roads at open-pit mining sites under various climatic conditions. These trucks can be used in construction of large industrial structures and hydraulic facilities, in construction of highway systems as well as in technological departments of the enterprises of processing industry. Depending on relative density of the transported materials maximal efficiency is achieved during operation with excavators and loaders with the following bucket capacity: 12 — 20 m3.

Length | 11500 (12050) mm |
Width | 6400 (7350) mm |
Height | 5900 (5900) mm |
main CHARACTERISTICS
Capacity | 110-130 mt |
Engine | MTU DD 12V4000 |
Engine power | 1194 kW |
Transmission | electromechanical |
Transmission Formula |
additional CHARACTERISTICS
Torque Nm / r / min | 7612 / 1500 |
Fuel rate @ nominal power, g/kW*h | 201 |
Tires | 33.00-51; 33.00R51;36/90-51 |
Transmission | AC/DC type |
Motor-wheel reduction gear | planetary, double-row |
Suspension | conventional for front and driving axles — trailing arms with central hinge |
Brakes (with hydraulic drive)
front wheels | dry disk brakes |
rear wheels | dry disk brakes |
parking brake | disk brake |
auxiliary brake | electrodynamic retarding by traction motors with forced air-cooling of braking resistors |
Body volume, m³
struck | 45,5; 50,1; 55,0; 59,6; 103,8 |
heaped 2:1 | 71,2; 75,5; 80,0; 84,0; 134,8 |
Turning radius, m | 13 |
Dump Weight, kg
unladen | 110400 (standard equipment set) |
gross weight | 240400-246400 |
Max speed, km/h | 64 |